Beijing Torch S&T Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. fei peng
  • Company Name : Beijing Torch S&T Co., Ltd.
  • Tel : 86-10-51669522
  • Fax : 86-10-51669522
  • Address : Beijing,Beijing,No.8 Xiedao Road, south of the middle section of Beijing Capital Airport Bypass, Chaoyang District, Beijing.
  • Country/Region : China
  • Zip : 100018

wave soldering machine TB780D

wave soldering machine TB780D
Product Detailed
Related Categories:Other Welding Equipment

Detailed Product Description


Flux spray system
A function of flux spray device
1 nozzle: import nozzle, better spray
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: anti-corrosive controlling flux and display flux.
B function of flux foam device
With foam function, inner foam pump, it dont need outer air supply, it is convenient to spray flux.
1 preheating temperature range: room temperature260
2 controlling way: with PID controlling to make welding process.
3 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.
4 Preheating security: surface temperature is lower than fire point of flux.
5 Preheat: it can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
Welding system features:
1 Material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Height range of wave crest: 08mm adjustment and keep wave crest balance.
4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
5 Unique nozzle: double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
6 Heat controlling system: PID control, accuracy is ±2
7 Moving tin pot: in and out can be finished by hand.
8 Motor of wave crest: import motor, running stable.
9 Tin pipe: screw thread stem

Controlling system
1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: there are main wiring modularization and controlling modularization.

Technology parameters:


  

Specification

TB780D(double wave crest)

1

solder type

lead / common solder

2

max PCB

50200mm

3

Components height

Above ≤130mm under ≤8mm

4

Capacity

100KG

5

Preheating length

600mm

6

temperature accuracy

±2

7

spray way

Foam

8

temperature range

room - 300

9

wave height

08mm, keep balance wave crest

10

heating controlling

PID

11

speed

01800mm/min

12

start power/normal power

12KW/6KW

13

preheating temperature

room260

15

Width adjust

Manual adjusting

16

Transmit angle

38

17

Direction

right→left

18

controlling accuracy

Taiwan motor

19

Weight Kg

650KG

20

Dimension L x W x H(mm)

1400*1000*1500MM
it is 2100mm when the machine include loading and cooling system.




Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.