Beijing Torch S&T Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. fei peng
  • Company Name : Beijing Torch S&T Co., Ltd.
  • Tel : 86-10-51669522
  • Fax : 86-10-51669522
  • Address : Beijing,Beijing,No.8 Xiedao Road, south of the middle section of Beijing Capital Airport Bypass, Chaoyang District, Beijing.
  • Country/Region : China
  • Zip : 100018

Full hot air reflow oven with six heating zones SR630

Full hot air reflow oven with six heating zones SR630
Product Detailed
Related Categories:Other Welding Equipment

Detailed Product Description


Features:
1. unique heating technology has be used in the heating system.
2.the SR630 uses imported large electric current relay with the radiator which is safe and reliable can be output with no contact .The efficiency be improved greatly, extending the using time.

3.The heating system use import and high quality components to make sure high stability and reliability of all system, it has longer using time.
4.the machine which is combined PID controlling function of temperature controlling device can observe outside temperature and thermal changing, and it can control heating component minimum impulse, so it can respond quickly, at the same time making sure temperature controlling accuracy. The error in the machine is very small, it is according with IPC standard that the direction of length and temperature distributing .
5.accuracy controller ,through intelligent operation of PID, control heating automatically , blurry controlling function can respond to thermal changing with furthest speed ,and then make temperature stable by inner controlling.
6. modularization design of the heating zone, easy to maintenance and assembly.
7. it has function for detecting trouble and alarming with sound and electricity.
8.independent and smart cycle design, heat in the top and bottom,  good heating compensate . high heating efficiency, energy-save, rapid heating speed, it is suitable to weld for BGA and CSP .special hot air cycle structure , make PCB and components heat equally, high efficiency, rapid calefactive speed.

9.advanced wind road design used in air system , the import wind system has three equilibrium wind device to make wind equilibrium. High heating exchange efficiency.
10.ahead heating zone, welding zone and cooling zone can heating independently up and down. Independent cycle and control,100 is the maximum temperature difference for Neighboring temperature zone.
11.import high temperature drive combined directly with driving hot air cycle, good hot air equilibrium. Stable operation long-life , low noise,  small shake.
12.efficiency is suitable in every heating zones, the speed of warming-up is quick. It is about 15 minutes from room temperature to setting temperature. heat compensating function are rapid and high efficiency13. modularization design , compact structure, easy to repair and maintenance.
14.Independent cooling zone to make sure low temperature which is needed when PCB is out.
15. frequency conversion driver is used in the transmission system, PID closed loop timing ,match import turbine decreasing driver with 1:150 , stable operation, speed range is from 0-2000mm/min.
16.independent roller structure and splint support  combined with stainless steel net chain , stable operation , speed accuracy is 1mm/min, it is suitable to weld for BGA CSP and 0201.
17.special stainless steel net chain, it is durable and wearable. It cant change for long time.
18. time-lapse open and close protection function, equably descension after closing machine. Prevent components distortion from unequally descension.
19.electronic controlling components is import quality spares which are to make sure stable operation for a long time. Warranty period is within three years.
technology parameter:

Mode

SR630

number of Heating-zones

Four in the upper, two in the lower

Length of heating-zones

1420mm

Heating way

Full hot air and micro-cycle

Number of cooling-zone

1

Transmit way

Net transportation

Transportation chain speed

0-2000mm/min

Power supply

Five line three item

 380V 50/60Hz

Starting power

8Kw

Working power

Approx3.0Kw

Warm-up time

About 15 minutes

Temperature control range

Room -400

Temperature control way

PID closed loop control, SSR drive

Temperature control accuracy

±1

Temperature dispersion of PCB board

±2

Abnormity alarm

Temperature abnormity alarm

dimension

L2600×W612×H1220

weight

Approx200Kg



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.